How to make a QR code that is easy to track
Paste the full web address, including https://. Turn on the UTM option and fill in the three main fields. utm_source is where the code lives (flyer, packaging, poster), utm_medium is the channel type (print, qr), and utm_campaign is a name you will recognise later. Google Analytics and most other tools read these parameters, so scans show up as their own source instead of "direct" traffic.
The code encodes the final address shown under the fields. Use a different campaign value for every place you print the code, otherwise you cannot tell which placement worked.
Choosing the error correction level
QR codes include extra data so they can still be read when part of the code is dirty or covered. Level L repairs about 7% of the data, M about 15%, Q about 25% and H about 30%. Higher levels make the code denser, with smaller squares. For a printed label or a screen, M is a sensible default. Use Q or H only when the code may get scuffed, or when you plan to place a small logo on top. If the code is small, avoid H because dense modules are harder to print cleanly.
Printing and testing
- Keep the four-square white border around the code. Scanners need it.
- Use a dark code on a light background. The tool warns you when contrast is low.
- Do not print below roughly 2 cm (about 0.8 inch) wide for a short URL. Longer URLs need more room.
- Prefer SVG for print shops, because it stays sharp at any size. The PNG is scaled in whole pixels so the edges stay crisp.
- Scan the printed result with two different phones before you send it to print.
Keep the URL short. Every extra character makes the code denser. If you add UTM fields, leave out the optional ones you do not need.